Emulsion Two Hand Operation Drill DP61-110

Emulsion Two Hand Operation Drill DP61-110

Contact

Product Code

DP61-110

Brief

Max. Torque: 110N·m, 8.5kg

Promotion

Contact: +84 904544588

Contact

Application

Applied in underground harsh environment to punch advance holes, coal caving holes, fire prevention holes, water and gas holes exploration holes and pressure measuring holes.

Features

● Safe

No auxiliary equipment required, and low maintenance, and minimize operator's fatigue.

● High speed of drilling

High-torque for startup, small moment of inertia, short time for acceleration and braking.

● Easy to install ,and simple operation

● High explosion-proof emulsion motor, and easy to get power source.

● Low noise to improve working environment of underground.

● Portable

Medium-low speed, high torque and high output. Using technology of anti-corrosion treatment for over-current components. Good wear resistance, simple structure, small size, light weight and easy to carry.

Manufacture model	DP61-110
Rated pressure (Mpa)	25
Max. working pressure (Mpa)	32
Max torque (N·m)	100
Rated torque output (N·m)	80
Rated speed (r/min)	500
Rated flow (L/min)	23
Max. output power (kw)	6
Max. drilling dia. (mm)	80
Working medium	Emulsion or mineral oil
Noise level dB(A)	96
Weight (kg)	8.5
Note: This models only conclude machine and the drill bits need to be purchased separately.

update_content

Taper-shank drill accessories

Drill bits for Balance Drill and Angle Drill

● Alloy twist bit:

Used for punching holes on metallic and nonmetallic work pieces.

● Carbide-tipped blade twist bit, carbide-tipped blade twist bit unit (with cooling system):

Used for punching holes on metallic and nonmetallic work pieces.The main body is reusable and changeable alloy blades make it lower using cost.

● Carbide-tipped core bit, carbide-tipped core bit unit (with cooling system):

Used for punching holes on metallic and nonmetallic work pieces;

The main body is reusable and changeable alloy blades make it lower using cost;

Equipped with water cooling system to reduce consumption of twist bit, and improve the drilling efficiency.

● Morse taper shank sleeves of core drill:

Used for switching different taper of drill bits.

Drill Bit	Manufacture Model	Order No.	Taper shank/ Drilling Dia.
Alloy Twist Bit	DB81-2-XX	2203 1212-26	MT2/15-23mm
Alloy Twist Bit	DB81-3-XX	2203 1316-40	MT3/24-31mm
Alloy Twist Bit	DB81-4-XX	2203 1416-50	MT4/32-50mm
Alloy Twist Bit	DB81-5-XX	2203 1516-100	MT5/51-76mm
Carbide-tipped hollow bit unit	DB82-2-XX	2203 2212-26	MT2/13-26mm
Carbide-tipped hollow bit unit	DB82-3-XX	2203 2316-40	MT3/16-40mm
Carbide-tipped hollow bit unit	DB82-4-XX	2203 2416-50	MT4/16-50mm
Carbide-tipped hollow bit unit	DB82-5-XX	2203 2516-100	MT5/16-100mm
Carbide-tipped hollow bit unit (with cooling system)	DB83-2-XX	2203 3212-26	MT2/12-26mm
Carbide-tipped hollow bit unit (with cooling system)	DB83-3-XX	2203 3316-40	MT3/16-40mm
Carbide-tipped hollow bit unit (with cooling system)	DB83-4-XX	2203 3416-50	MT4/16-50mm

Emulsion Two Hand Operation Drill DP61-110

Emulsion Two Hand Operation Drill DP61-160

Emulsion Two Hand Operation Drill DP61-140

Emulsion Two Hand Operation Drill DP61-090

Emulsion Two Hand Operation Drill DP61-060